digitron semiconductors 144 market street kenilworth nj 07033 usa phone +1.908.245-7200 mac3010 series silicon bidirectional thyristors MAC3020 series mac3030 series mac3040 series available non-rohs (standard) or rohs compliant (add pbf suffix). available as ?hr? (high reliability) screened per mil-prf- 19500, jantx level. add ?hr? suffix to base part number. maximum ratings (t c = 25c unless otherwise noted) current ratings rating symbol -4 -8 -15 -25 -40 -401 unit rms on-state current (full sine wave, 50 to 60hz) i t(rms) 4.0 8.0 15 25 40 40 amps peak non-repetitive surge current (1 cycle, 60 hz, t c = 110c) i tsm 30 80 150 250 300 300 amps circuit fusing considerations (t j = -40 to +110c, t = 8.3ms) i 2 t 3.6 26 90 260 370 370 a 2 s peak gate voltage (t 2.0s) v gm 5 10 10 10 10 10 volts peak gate power (t 2.0s) p gm 10 20 20 20 20 20 watts peak gate current (t 2.0s) i gm 11 12 12 12 12 12 amps average gate power (t c = 80c, t = 8.3ms) p g(av) 0.5 watts operating junction temperature range t j -40 to +100 -40 to +125 -40 to +100 c storage temperature range t stg -40 to +150 c mounting torque - 6.0 8.0 8.0 8.0 30 30 in. lb. peak repetitive forward voltage mac3010/mac3030 MAC3020/mac3040 v drm 250 400 250 400 250 400 250 400 250 400 250 400 volts note 1: v drm for all types can be applied on a continuous basis. blocking voltage shall not be tested with a constant current source such t hat the voltage ratings of the devices are exceeded. thermal characteristics current ratings characteristic symbol -4 -8 -15 -25 -40 -401 unit thermal resistance, junction to case r ? jc 3.5 2.2 2.0 1.2 0.9 0.9 c/w thermal resistance, junction to ambient r ? ja 75 60 60 60 1.0 1.0 c/w electrical characteristics (t c = 25c and either polarity of mt2 to mt1 voltage unless otherwise noted) characteristic symbol min typ. max unit -4 current rating peak blocking current (2) (rated v drm @ t j = 110c) i drm - - 2.0 ma peak on-state voltage (either direction) (i tm = 6a peak, pulse width 2 ms, duty cycle 2%) v tm - - 2.0 volts gate trigger current (continuous dc) (v d = 12v, r l = 100 ? ) mt2(+),g(+); mt2(-),g(-) i gt - - 30 ma gate trigger voltage (continuous dc) (v d = 12v, r l = 100 ? ) mt2(+),g(+); mt2(-),g(-) (r l = 10k ? , t j = 110c) mt2(+),g(+); mt2(-),g(-) v gt - 0.2 - - 2.0 - volts holding current (v d = 12v, i tm = 200ma, gate open) i h - - 40 ma sales@digitroncorp.com fax +1.908.245-0555 www.digitroncorp.com rev. 20130205
digitron semiconductors 144 market street kenilworth nj 07033 usa phone +1.908.245-7200 mac3010 series silicon bidirectional thyristors MAC3020 series mac3030 series mac3040 series characteristic symbol min typ. max unit gate controlled turn on time (i tm = 6a peak, i g = 100ma) tgt - 1.5 - s critical rate of rise of commutation voltage (i tm = 6a peak, commutating di/dt = 3.1a/ms, gate unenergized, t c = 85c) dv/dt(c) - 5.0 - v/s critical rate of rise of off-state voltage (exponential waveform, t c = 110c) dv/dt - 20 - v/s note 2: ratings apply for open gate conditions. thyristor device s shall not be tested with a co nstant current source for blocki ng voltage such that the voltage applied exceeds the rated blocking voltage. mechanical characteristic case to-126 (mac3010-4) marking body painted, alpha-numeric pin out see below to-126 inches millimeters min max min max a 0.425 0.435 10.80 11.050 b 0.295 0.305 7.490 7.750 c 0.095 0.105 2.410 2.670 d 0.020 0.026 0.510 0.660 f 0.115 0.125 2.920 3.180 g 0.091 0.097 2.310 2.460 h 0.050 0.095 1.270 2.410 j 0.015 0.025 0.380 0.640 k 0.595 0.655 15.110 16.640 m 3 typ 3 typ q 0.148 0.158 3.760 4.010 r 0.045 0.055 1.140 1.400 s 0.025 0.035 0.640 0.890 u 0.145 0.155 3.680 3.940 v 0.040 - 1.020 - sales@digitroncorp.com fax +1.908.245-0555 www.digitroncorp.com rev. 20130205
digitron semiconductors 144 market street kenilworth nj 07033 usa phone +1.908.245-7200 mac3010 series silicon bidirectional thyristors MAC3020 series mac3030 series mac3040 series electrical characteristics (t c = 25c and either polarity of mt2 to mt1 voltage unless otherwise noted) characteristic symbol min typ. max unit -8, -15, -25 current rating peak blocking current (2) (@ t j = 125c) i drm - - 2.0 ma peak on-state voltage (i tm = 2 i t(rms) a peak, pulse width 2 ms, duty cycle 2%) mac3030-8 mac3030-15 mac3030-25 v tm - - - - - - 1.6 1.6 1.85 volts gate trigger current (continuous dc) (v d = 12v, r l = 100 ? ) mt2(+),g(+); mt2(-),g(-) i gt - - 40 ma gate trigger voltage (continuous dc) (v d = 12v, r l = 100 ? ) mt2(+),g(+); mt2(-),g(-) (r l = 10k ? , t j = 125c) mt2(+),g(+); mt2(-),g(-) v gt - 0.2 - - 2.0 - volts holding current (v d = 12v, i tm = 200ma, gate open) i h - - 40 ma gate controlled turn on time (i tm = 2 i t(rms) a peak, i g = 100ma) t gt - 1.5 - s critical rate of rise of commutation voltage (i tm = 2 i t(rms) a peak, commutating di/dt = 0.52 i t(rms) a/ms , gate unenergized, t c = 80c) dv/dt(c) - 5.0 - v/s critical rate of rise of off-state voltage (exponential waveform, t c = 125c) dv/dt 40 - - v/s note 2: ratings apply for open gate conditions. thyristor device s shall not be tested with a co nstant current source for blocki ng voltage such that the voltage applied exceeds the rated blocking voltage sales@digitroncorp.com fax +1.908.245-0555 www.digitroncorp.com rev. 20130205
digitron semiconductors 144 market street kenilworth nj 07033 usa phone +1.908.245-7200 mac3010 series silicon bidirectional thyristors MAC3020 series mac3030 series mac3040 series mechanical characteristic case to-220ab (mac3010-8, -15, -25) marking body painted, alpha-numeric pin out see below to-220ab inches millimeters min max min max a 0.575 0.620 14.600 15.750 b 0.380 0.405 9.650 10.290 c 0.160 0.190 4.060 4.820 d 0.025 0.035 0.640 0.890 f 0.142 0.147 3.610 3.730 g 0.095 0.105 2.410 2.670 h 0.110 0.155 2.790 3.930 j 0.014 0.022 0.360 0.560 k 0.500 0.562 12.700 14.270 l 0.045 0.055 1.140 1.390 n 0.190 0.210 4.830 5.330 q 0.100 0.120 2.540 3.040 r 0.080 0.110 2.040 2.790 s 0.045 0.055 1.140 1.390 t 0.235 0.255 5.970 6.480 u - 0.050 - 1.270 v 0.045 - 1.140 - z - 0.080 - 2.030 sales@digitroncorp.com fax +1.908.245-0555 www.digitroncorp.com rev. 20130205
digitron semiconductors 144 market street kenilworth nj 07033 usa phone +1.908.245-7200 mac3010 series silicon bidirectional thyristors MAC3020 series mac3030 series mac3040 series electrical characteristics (t c = 25c and either polarity of mt2 to mt1 voltage unless otherwise noted) characteristic symbol min typ. max unit -40, -401 current rating peak blocking current (2) (@ t j = 110c) i drm - - 2.0 ma peak on-state voltage (either direction) (i tm = 56a peak, pulse width 2 ms, duty cycle 2%) v tm - - 1.85 volts gate trigger current (continuous dc) (v d = 12v, r l = 100 ? ) mt2(+),g(+); mt2(-),g(-) i gt - - 40 ma gate trigger voltage (continuous dc) (v d = 12v, r l = 100 ? ) mt2(+),g(+); mt2(-),g(-) (r l = 10k ? , t j = 110c) mt2(+),g(+); mt2(-),g(-) v gt - 0.2 - - 2.0 - volts holding current (v d = 12v, i tm = 200ma, gate open) i h - - 50 ma gate controlled turn on time (i tm = 56a peak, i g = 200ma) t gt - 1.5 - s critical rate of rise of commutation voltage (i tm = 56a peak, commutating di/dt = 22 a/ms , gate unenergized, t c = 60c) dv/dt(c) 5.0 - - v/s critical rate of rise of off-state voltage (exponential waveform, t c = 110c) dv/dt 30 - - v/s note 2: ratings apply for open gate conditions. thyristor device s shall not be tested with a co nstant current source for blocki ng voltage such that the voltage applied exceeds the rated blocking voltage mechanical characteristic case to-48 (mac3010-40) marking body painted, alpha-numeric polarity cathode is stud to-48 inches millimeters min max min max a 0.604 0.614 15.340 15.600 b 0.551 0.559 14.000 14.200 c 1.050 1.190 2.670 30.230 f 0.135 0.160 3.430 4.060 h - 0.265 - 6.730 j 0.420 0.455 10.670 11.560 k 0.620 0.670 15.750 17.020 l 0.300 0.350 7.620 8.890 q 0.055 0.085 1.400 2.160 t 0.501 0.505 12.730 12.830 sales@digitroncorp.com fax +1.908.245-0555 www.digitroncorp.com rev. 20130205
digitron semiconductors 144 market street kenilworth nj 07033 usa phone +1.908.245-7200 mac3010 series silicon bidirectional thyristors MAC3020 series mac3030 series mac3040 series mechanical characteristic case to-48 iso (mac3010-401) marking body painted, alpha-numeric polarity cathode is stud to-48 iso inches millimeters min max min max a 0.551 0.559 14.000 14.200 b 0.501 0.505 12.730 12.830 c - 1.280 - 32.510 f - 0.160 - 4.060 h - 0.265 - 6.730 j 0.420 0.455 10.670 11.560 k 0.300 0.350 7.620 8.890 l 0.255 0.275 6.480 6.990 q 0.055 0.085 1.400 2.160 t 0.135 0.150 3.430 3.810 sales@digitroncorp.com fax +1.908.245-0555 www.digitroncorp.com rev. 20130205
|
